construction premixed dry motar dryer machine

Premixed dry motar dryer machine: 1.reasonable structure 2.high effciency 3.convenient transportation 4.easy operation

Premixed dry motar dryer machine’s introduction

The premixed dry motar dryer machine is made up of Stove, Main Rotary Body, Screw Conveyor, Cyclone Separator, Air-lock, and Fan and matched Pipes which can realize to reduce the moisture from 60%-10%. The heat generator combined fan is not included in our quotation. Mainly used in building material, metallurgy, chemical plant, cement plant for drying of limestone slag, coal powder, slag, and clay stone. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.

 Premixed dry motar dryer machine’s specification:

Type(mm)	indiclination(%)	rotation  speed(r/min)	input  tempreture(ºC)	motor  power(kw)	outpur(t/h)	weight(t)
600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	18-30	60
Φ2800×15000	3-5	1.5-5	≤800	40	20-35	72.5
Φ2800×18000	3-5	1.5-5	≤800	40	25-35	75
Φ3000×20000	3-5	1.5-5	≤800	55	28-40	78
Φ3000×25000	3-5	1.5-5	≤800	75	32-45	104.9

Premixed dry motar dryer machine’s operating principle:

Dry and wet material from the belt conveyor or bucket elevator to the hopper,then by feeding machine of hopper through charging pipe into the feed side. Feeding pipeline’s slope than the natural material, in order to materials smoothly into dry containers. Drier with the horizontal cylinder is a slightly into tilted rotating cylinder. Material from high end to join, heat body by low-end enter, with material into counter-current contact, also have heat body and materials together and flow into the barrel. with the cylinder rotate by gravity materials to a run on the bottom of the end. Wet materials in the cylinder body forward movement process, directly or indirectly got heat body heat, make wet materials to dry, then the discharge end by the belt conveyor or screw conveyor sent. In the cylinder body wall with copy plate, It is the function of the material copied up and planted, make the material and the airflow contact surface increases to improve the drying rate and to promote material progress. Heat-carrier is generally divided into hot air and flue gas. After the heat-carrier by the dryer,  through the bag filter or wet dust collector and then put emissions, if you want to reduce dust content of exhaust gas.

 

construction premixed dry motar dryer machine